Make it yours
PLISSÉfor iPhone 18 Pro Max
₹1,999Inclusive of GST
Edition of 100 · 100 remain
Up to three characters, debossed into the back. +₹349
Fine raised ribs along both long sides, for a surer hold.
Two eyelets in the bottom corners for a wrist or crossbody strap.
A ring set into the halo for a firmer hold on magnetic chargers, mounts and wallets.
Made to order. Leaves our atelier in 5–7 days.
- Camera Control stays open, so it responds exactly as it does without a case.
- MagSafe works through the smooth halo. Add the magnet ring for a firmer hold on mounts and wallets.
The design
PLISSÉ begins with a length of pressed cloth. Vertical flutes run the full height of the back, close and even, the way a pleated skirt falls from a waistband. Under a low light, every flute casts its own hairline of shadow.
Materials
Printed in powder-bed TPU, a firm, slightly yielding material that needs no supports, then bead-blasted, coloured and lined in microfibre by hand. More on materials
Dimensions
≈ 166.8 × 81.4 × 11.7 mm, ≈ 31 g. Figures are estimates until fit-test prints are measured.
Care
Wipe with a soft, slightly damp cloth. Keep away from solvents and prolonged direct heat. Let it dry fully before fitting it back on the phone.
Shipping and returns
Complimentary shipping across India, tracked. As each case is made for you, it cannot be returned for a change of mind; if it does not fit or arrives with a defect, we remake it, free, when told within 7 days of delivery. Returns policy
₹1,999
Inclusive of GST
The design
Couture pleating, translated into a hard object.
PLISSÉ begins with a length of pressed cloth. Vertical flutes run the full height of the back, close and even, the way a pleated skirt falls from a waistband. Under a low light, every flute casts its own hairline of shadow.
Below the camera the pleats ease out over fourteen millimetres and the surface goes smooth, like fabric drawn flat across a frame. Around the magnet zone they part, leaving a quiet medallion set into the folds.
Pattern
Three depths of the same idea
Whisper
Wide, shallow pleats. 4.0 mm pitch, 0.4 mm deep.
Signature
The house pleat. 3.0 mm pitch, 0.6 mm deep.
Bold
Deep flutes with alternating wide and narrow lands. 5.0 mm pitch, 0.8 mm deep.
Specification
PLISSÉ
for iPhone 18 Pro Max
₹1,999 to ₹2,797 with every option. Inclusive of GST.
- Device
- iPhone 18 Pro Max
- Case dimensions
- ≈ 166.8 × 81.4 × 11.7 mm
- Weight
- ≈ 31 g
- Wall
- 1.6 mm
- Back
- 1.8 mm
- Screen lip
- 1 mm above the glass
- Camera lip
- 1.2 mm above the lenses
- Material
- Powder-bed TPU, bead-blasted to a satin finish
- Lining
- Microfibre, applied by hand
- Made
- Designed, printed and finished by hand in India
≈ Estimated from the CAD model; final figures follow the first fit-test prints.
Made to order
Each case is made only once you order it.
You compose it
Choose the colourway, the depth of the pattern and, if you like, a monogram of up to three characters. What you see in three dimensions is the file we print.
We print it, once
Your case is printed for you alone in powder-bed TPU, a process that needs no supports and leaves an even, satin surface. Nothing is made in advance.
We finish it by hand
Each case is bead-blasted, coloured, lined in microfibre and checked for fit before it leaves the atelier, five to seven days after you order.
